98-0940 Anyone know anything about the caR?

[Stin1]

The em1 snaps into that side where number 9 is in the integra.

[Stin1]

I had a conversation with mark and realized way later , he was asking about the sash. Whoops! No one answered this, so I got it.

IMG_3808.jpg (295.99 KiB) Viewed 1666 times

This is my driver side. I changed a lot of this rubber but I really don't remember if I bought this.

IMG_3810.jpg (263.64 KiB) Viewed 1666 times

My passenger has a chip maybe?

IMG_3812.jpg (245.58 KiB) Viewed 1666 times

This is cool on this side. There's a slight angle on one side.

[Stin1]

IMG_3814.jpg (338.99 KiB) Viewed 1666 times

These are the same part number on both sides. There's an angle that differs from side to side.

IMG_3815.jpg (254.02 KiB) Viewed 1666 times

[Stin1]

IMG_3816.jpg (180.87 KiB) Viewed 1666 times

[Stin1]

IMG_3818.jpg (220.89 KiB) Viewed 1666 times

[Stin1]

The attachment IMG_3818.jpg is no longer available

I found this dang valve.

IMG_3840.jpg (344.99 KiB) Viewed 1632 times

and I noticed the third nipple isn't attached to anything. What is it supposed to attach to?

[Stin1]

IMG_3847.jpg (322.62 KiB) Viewed 1631 times

[Stin1]

I am looking at the diagram. I have determined I am missing #10 . It's discontinued.

IMG_3855.jpg (116.6 KiB) Viewed 1620 times

This thing is on every trim from 94-99 according to the part number.

IMG_3856.jpg (126.46 KiB) Viewed 1620 times

I am pretty sure the parts car has this. I hope. It's a 97 ls. I need someone's help with a 98 to help me with where this 3 way valve third port needs to tee into when I get the needed parts. The 97 small canister is different and 2000 big vent is different. The 2000 actually doesn't even show this valve. It's attached to a "filter". Here's that diagram

IMG_3862.jpg (162.35 KiB) Viewed 1620 times

IMG_3860.jpg (303.91 KiB) Viewed 1620 times

this cut hose was on it. Could someone please, pretty please, with sugar on top , tell me how this 98 should work?

[aklackner]

This is #10 IIRC it clips into one of the brackets (fuel filter) right there and seems to be a clean air intake?

[aklackner]

The black elbow (clipped into the fuel filter bracket) is the same part on the 97 LS.