98-1059 is here to stay

[Sp00nFedFilms]

Do you also have the sort of shaped in between piece, that’s bows between the rubber pictured and the rubber on the solenoid?

I don’t. Thought this was it...

[NOCSUCOW]

Beautiful, we should find some one to make a run.

Probably not a bad idea if someone knows a machinist. I’m happy it came with the rubber stay, that’s extinct as well.

That rubber piece is discontinued now? Good thing I ordered mine a month and some change ago.

[Sp00nFedFilms]

So I got around to removing the UKDM bracket and installing the USDM one.



The issue I’m having now is I believe my sensor is still UKDM and made for their bracket. No way to get it to sit the correct direction according to all pictures I’m finding.





As seen here:



I was able to muster up a clip I had laying around to have it be as proper as possible.







Finished

[Stin1]

Mark and I discussed this. He has the proper bracket. He is missing # 5 in the diagram, the stay . This is what I believe acklander was referring to earlier. Nla

IMG_4059.jpg (108.37 KiB) Viewed 882 times

I also noticed his U.K.?? Bracket was angled different than mine.

IMG_4062.jpg (338.04 KiB) Viewed 882 times

[Stin1]

I set up my U.K. Bracket as ack said nipple forward to the manifold. Marks bracket has the stay solenoid horizontal vs vertical.

[Stin1]

IMG_4069.jpg (210.56 KiB) Viewed 882 times

IMG_4070.jpg (157.36 KiB) Viewed 882 times

My U.K. Stay appears to be identical to the stay I received on my purchase of the bracket and solenoid for the u.s model.

[Sp00nFedFilms]

Yup. Exactly right bud. Hopefully someone comes through with the stay for sale.

[Sp00nFedFilms]

The car used to pull a bit to the right on the highway. Very bothersome when you’re used to a 2019 RDX daily driver. Time to fix that.



Good to go!



Felt good about the car so I decided to wash her. This time I pulled out all the stops. Even though the plan is for an exterior restoration this winter, I’ll be performing a light paint correction this holiday weekend.




For those who care to see the ITR day from IG...


https://youtu.be/zNUGSq9Ru_c

[Sp00nFedFilms]

Just got some good news (I hope)

Received an email reply today from a month old email stating there’s a 98 ITR engine harness available for purchase. Problem is, it’s from a CDM Integra Type R.

Does anyone know if this will be plug and play in my 98 USDM?

[9701TypeR]

Just got some good news (I hope)

Received an email reply today from a month old email stating there’s a 98 ITR engine harness available for purchase. Problem is, it’s from a CDM Integra Type R.

Does anyone know if this will be plug and play in my 98 USDM?

Your purge solenoid won’t plug in and if you are running a obd2b distributor from a 00-01 that also will not work.