2000 Honda Civic SI - Journal

Feel free to discuss anything about the late 80s to early 00s Hondas and Acuras!
User avatar
JDMJNKY
Posts: 401
Joined: Sun Aug 27, 2017 12:05 pm
Location: Socal
Badge Number: 0874

2000 Honda Civic SI - Journal

Post by JDMJNKY » Thu Apr 30, 2020 11:17 pm

I know what forum I'm on gents but like many of you I have an affinity for cars. The Civic SI especially. I think it is one of Hondas most unique releases set apart by it's vin change unlike the ITR. Both GSR and ITR would share the "DC2" chassis coding. Doesn't make it better or lesser than in my eyes, just unique. Oddly*I actually walked away from an 01 black ITR the week I found my MR SI. I wasn't a fan of the USDM fronts back then LOL. Well in 1999 when these cars came out my brother was a senior in HS, I was a JR. He and I joked he'd get a blue one and I'd get a red one. Our life paths varied but I ended up getting a red one in early 200 - No mommy, no daddy, but I was living at home and had a great job. The car was a dream come true, but HOLY DWB that bad boy was a cop magnet!!

Image

Image

Image


Well last week a buddy messages me and says, "Hey Joel, I know you like EM1's do you want to buy one?" I reply with the basics, "What color, price, yr, issues?" I go check it out and fire it up, it sounds healthy but did not wish to accelerate and drive under its own power. So we strike up an "as-is" deal on wednesday after going through the car. Our schedules agree for a Friday pick up, so I go over his place on friday morning, I swap out the complete TB, re-did the timing belt followed by a valve adjustment. The car sounded so healthy and was ready to run. Later that night I returned with my wife and here it is.

Image

Image

Image

the morning after
Image

User avatar
coolhandluke
Posts: 3359
Joined: Sun Aug 13, 2017 11:26 am
Location: US
Badge Number: 98-1040
Contact:

Re: 2000 Honda Civic SI - Journal

Post by coolhandluke » Fri May 01, 2020 4:00 pm

Oh very cool. I've always had a soft spot for EM1 Civic Si's, reminds me of HS.
Type-R Expo
Current: 98-1040 Stolen 12/22/21
Previous: 98-0197, 01-0187, 98-0731, 97 #00171

User avatar
JDMJNKY
Posts: 401
Joined: Sun Aug 27, 2017 12:05 pm
Location: Socal
Badge Number: 0874

Re: 2000 Honda Civic SI - Journal

Post by JDMJNKY » Fri May 01, 2020 9:55 pm

Rough around the edges but for the price I couldn't say no.

Since snagging it i've raised it back to stock height. Repaired some wiring, and gave the interior a wipe down.

04/27/20
Tackled some wiring issues at the ecu
Image

Image


donor connection from the yard
Image

Image


04/30/20
Returned the car to stock ride height, came with some decent goods
Image

Image


05/01/20
Wiped & vacuumed the interior
Image

Image

Image



Engine bay reference marker
Image


The perfectly imperfect walk around
Image

Image

Image

Stin1
Posts: 1672
Joined: Fri Nov 17, 2017 10:43 pm

Re: 2000 Honda Civic SI - Journal

Post by Stin1 » Sat May 02, 2020 1:07 pm

Seen it on the other site . Looks like from the pictures someone also swiped the leather steering wheel.

User avatar
JDMJNKY
Posts: 401
Joined: Sun Aug 27, 2017 12:05 pm
Location: Socal
Badge Number: 0874

Re: 2000 Honda Civic SI - Journal

Post by JDMJNKY » Sat May 02, 2020 10:57 pm

Indeed. On the hunt for one currently. Have a few leads, waiting on some pics.

Insidiouseg6
Posts: 212
Joined: Sun Aug 13, 2017 6:05 pm
Badge Number: 01-0388
Contact:

Re: 2000 Honda Civic SI - Journal

Post by Insidiouseg6 » Sun May 03, 2020 12:24 am

Love the EM1's! Nice pick up I'm sure it'll be a fun project

User avatar
JDMJNKY
Posts: 401
Joined: Sun Aug 27, 2017 12:05 pm
Location: Socal
Badge Number: 0874

Re: 2000 Honda Civic SI - Journal

Post by JDMJNKY » Mon May 11, 2020 11:27 pm

Insidiouseg6 wrote: Sun May 03, 2020 12:24 am Love the EM1's! Nice pick up I'm sure it'll be a fun project
Thanks ninja! It'll just be a daily. Nothing fancy.


Nothing new really, I replaced the tachometer as the old one was stuck on 14k rpm.
Image

bought an EM1 Steering wheel shell to replace the rotten EX joint 
Image

Image

Oh. and some LEDs, has a shot HID kit on it, not feeling it.
Image

Image

Image

and I'm on the hunt for these items if anyone has them:
Black Hood 99-00
Black front Bumper 99-00
Drive Fender 99-00
JDM ITR 4-1 Header Heat Shield

Dave7CDMTYPER
Posts: 1096
Joined: Tue Aug 15, 2017 2:17 am
Location: US
Badge Number: 01-1322

Re: 2000 Honda Civic SI - Journal

Post by Dave7CDMTYPER » Tue May 12, 2020 12:11 am

How'd you decide on the LED's? Is it straightforward install? I've been wanting some better lighting on my gs-r, but don't want to modify wiring/connections.
ITR CDM 01-1322
2001 GS-R
I have badge #00-1259 in hand.

User avatar
aw614
Posts: 578
Joined: Sun Aug 13, 2017 11:27 pm
Location: Tampa
Contact:

Re: 2000 Honda Civic SI - Journal

Post by aw614 » Tue May 12, 2020 7:29 am

Dave7CDMTYPER wrote: Tue May 12, 2020 12:11 am How'd you decide on the LED's? Is it straightforward install? I've been wanting some better lighting on my gs-r, but don't want to modify wiring/connections.
Also curious about this, a friend of mine put them in his old new edge mustang and they used the same 9006 bulbs integras used, but since he had a 30% tinted windshield, I thought his lighting wasn't much better than standard bulbs. Curious to see the results without a tinted front windshield.
-Andrew Wong

User avatar
JDMJNKY
Posts: 401
Joined: Sun Aug 27, 2017 12:05 pm
Location: Socal
Badge Number: 0874

Re: 2000 Honda Civic SI - Journal

Post by JDMJNKY » Tue May 12, 2020 7:50 pm

aw614 wrote: Tue May 12, 2020 7:29 am
Dave7CDMTYPER wrote: Tue May 12, 2020 12:11 am How'd you decide on the LED's? Is it straightforward install? I've been wanting some better lighting on my gs-r, but don't want to modify wiring/connections.
Also curious about this, a friend of mine put them in his old new edge mustang and they used the same 9006 bulbs integras used, but since he had a 30% tinted windshield, I thought his lighting wasn't much better than standard bulbs. Curious to see the results without a tinted front windshield.
Well I've used them before with great success. For me, this is my temporary solution to poor lighting.

How to decide:
Lumens - never accurate as described in listings. Often inflated.
Type - there are many sides to an LED, 4 often has the best light output but scatters the beam. CREE is the "king" of led bulbs
Most importantly IP rate, fan, heat sink design, LED type seal the deal for me.

I've used this brand before in my GC8 Subaru and apparently for the coin I'd buy them again. I chose these because they were one of very few companies who clearly advertise these work and have been designed to work in partnership with the factory shield. My wifes tahoe has a set of leds that shine 10 houses over, it'll blind you, like looking at a weld with the naked eye. Now if the money was abundant for this car, I'd choose a simple retrofit, but as of right right now I don't wish to spend the time and learn how to do one.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests