DC2/DB8 QUESTIONS Type R project almost done

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Post Reply
Klasse
Posts: 136
Joined: Tue Aug 15, 2017 2:11 am
Location: NZ

Re: DC2/DB8 QUESTIONS Type R project almost done

Post by Klasse » Sun Nov 05, 2017 12:01 am

I got 1170mm overall from flange to end of the tip. And 350mm from the back of the muffler itself to the end of the tip
'97 DB8 Integra Type R, '97 EK1 Civic LXi
ex: '94 CD6 Accord SiR, '92 EG9 Civic SiR, '89 DA6 Integra XSi
Top
Misterjew
Posts: 119
Joined: Wed Nov 01, 2017 3:40 pm

Re: DC2/DB8 QUESTIONS Type R project almost done

Post by Misterjew » Sun Nov 05, 2017 4:54 pm

Purplepassiongsr wrote: ↑Sat Nov 04, 2017 9:46 pm A new intermediate shaft might be worth a shot if you're positive your using the right axle seal. Hmo has shafts for like $50. I had a similar issue but was due to getting the wrong axle seal sent to me, probably for a 36mm axle. The ID was too large and leaked trans fluid. Swapped out for the right one and not a drop after that. Good luck tracking it down
I actually ordered a brand new yonaka brand shaft. Reviews were good and it was new. I have a new oem seal also ready to go and I will throw it back together. I just really hope it is not transmission related. My oem shaft was missing the brass washer but I don't think that was the issue.
98-1147
02 BB S2000 OEM HT/17x10 Ce28/J’s Racing
Top
Dave7CDMTYPER
Posts: 1096
Joined: Tue Aug 15, 2017 2:17 am
Location: US
Badge Number: 01-1322

Re: DC2/DB8 QUESTIONS Type R project almost done

Post by Dave7CDMTYPER » Mon Nov 06, 2017 10:27 pm

Itr muffler FS: https://honda-tech.com/forums/sale-10/m ... d-3310154/
ITR CDM 01-1322
2001 GS-R
I have badge #00-1259 in hand.
Top
Post Reply

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest