FS: Brand New AP Racing Kit for '97-01 Integra Type R - Built by Fastbrakes

[IPGJames]

Brand New AP Racing Kit for '97-01 Integra Type R - Built by Fastbrakes

$2250
Email - James@IPGparts.com

Includes:
2x AP Racing CP8350 4 Piston Calipers
2x 2 Piece Rotors that are 294mm Diameter by 28mm Thick
2x Caliper Mounting Brackets with Hardware
2x Steel Braided Brake Lines
1x Set of Raybestos ST43 Racing Brake Pads

I purchased this kit for my STL Integra Race car to keep in the brake rule limit but it will not work with my 15x7" wheels (I am limited to running 15x7 wheels). This kit will fit behind some 15" wheels but most likely will need to be something wider like 15x8" TE37 or Gramlights ... and then of course will work well with larger 16"+ wheels.

- Will consider partial trade with like new Spoon Twin Block Calipers

(This kit will also work on the 97-01 Honda Prelude as well)

[aklackner]

Do these work with ABS systems (maintain bias) similar to stoptec?

[coolhandluke]

The images look to be hosted on FB which I don't believe allows hosting outside their sites. I would try rehosting at Flickr or another host of choice.

[IPGJames]

The images look to be hosted on FB which I don't believe allows hosting outside their sites. I would try rehosting at Flickr or another host of choice.

Fixed

[IPGJames]

Do these work with ABS systems (maintain bias) similar to stoptec?

Sure, will work with ABS - that is exactly how I planned on running them

[coolhandluke]

The images look to be hosted on FB which I don't believe allows hosting outside their sites. I would try rehosting at Flickr or another host of choice.

Fixed

These look like quality hat designs. That is one of my complaints with my current BBK. Best wishes with the sale.

[Dave7CDMTYPER]

Those brakes are beautiful.

I wish we knew more exactly what size wheels would fit. OP you mention 16" wheels. What width for 16" would fit these brakes (if you know)?

[IPGJames]

Those brakes are beautiful.

I wish we knew more exactly what size wheels would fit. OP you mention 16" wheels. What width for 16" would fit these brakes (if you know)?

I haven't tried to test fit them with anything other than the 15x7 TE37 and 15x7 Team Dynamics wheels that I have

here is a more detailed thread on a similar brake kit to this and wheel fitment - there are quite a few people running this brake setup on their ITR's - viewtopic.php?f=5&t=191