WTB: Type R catalytic converter
WTB: Type R catalytic converter
Looking to purchase a New, OEM USDM
Type R catalytic converter. Part Number:
18160-P73-A00
Please contact if you are ready to sell.
Thank you community
Type R catalytic converter. Part Number:
18160-P73-A00
Please contact if you are ready to sell.
Thank you community
-
- Posts: 346
- Joined: Thu Aug 17, 2017 11:34 pm
Re: WTB: Type R catalytic converter
I wish you luck. This might be the hardest of all the USDM parts to find.
I received the original cat with my 98 CDM but unfortunately it is loose inside. A friend even gave the original cat heat shields top and bottom.
I received the original cat with my 98 CDM but unfortunately it is loose inside. A friend even gave the original cat heat shields top and bottom.
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
Re: WTB: Type R catalytic converter
They are out there, it’s just a matter of the individual letting go of it, why I wrote if you’re ready to sell ; )
Re: WTB: Type R catalytic converter
New ones are out there? I bet Acura ate the new ones up on warranty replacements . If they are out there does anyone have a picture ?
-
- Posts: 346
- Joined: Thu Aug 17, 2017 11:34 pm
Re: WTB: Type R catalytic converter
I feel like there are very few people who bought a new OEM USDM cat and put it in storage. And used one were likely recycled for for cash.
I will likely have a custom cat made to replace my worn out OEM cat.
I will likely have a custom cat made to replace my worn out OEM cat.
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
Re: WTB: Type R catalytic converter
Any recs of aftermarket ones?
Re: WTB: Type R catalytic converter
Both OEM heatshields show available for the USDM ITR. I have yet to find a quality aftermarket cat, especially one that isn't raspy. I went so far as to replace the entire exhaust with a JDM ITR setup from the header back, and had a bung made in the cat for the O2, no CEL's yet.
Re: WTB: Type R catalytic converter
OEM cat still shows available for 99-00 Civic Si; part number: 18160-P2P-A00
I'm sure there is a way to make that work considering the Si was a B series with just a little less power than the C5.
I'm sure there is a way to make that work considering the Si was a B series with just a little less power than the C5.
Re: WTB: Type R catalytic converter
My next custom set up will try a GESI “gsport” cat. It’s certified to federal standards, uses a metal honeycomb (vs ceramic), and the housing is stainless steel. Use of the metal honeycomb allows better flow (300 cell). The unit I picked up is 4” x8” (2.5” in/out).
Paperwork with it cautions against heating above 900c while tuning, while it’s rated to this temp sustained exposure will cause damage.
Looks like it’s $330 for the cat itself from Hpt auto and of course this still needs someone to weld flanges and an O2 bung.
Paperwork with it cautions against heating above 900c while tuning, while it’s rated to this temp sustained exposure will cause damage.
Looks like it’s $330 for the cat itself from Hpt auto and of course this still needs someone to weld flanges and an O2 bung.
Re: WTB: Type R catalytic converter
A member on here makes custom high quality cats . I can’t recall his name .
Who is online
Users browsing this forum: No registered users and 0 guests