Need help to resolve wheel hop issue
-
- Posts: 5
- Joined: Mon Feb 08, 2021 10:14 am
Need help to resolve wheel hop issue
When taking off even a little bit aggressively, front tires jumping up and down, I am not dropping /sidestepping clutch, just a good amount of gas. I am sure I am gonna break a driveline part. Anything gonna fix this that any of you have installed ?
Re: Need help to resolve wheel hop issue
Based on your screenname, you have a new CTR? If its going by my experience from driving a fwd turbo GTI and a few other modern fwd turboc ars what kind of tires are you using? The original factory tires or another set?
And not sure if the CTR forums have mentioned it, but have people swapped to stiffer motor mounts to solve wheel hop? That was one of the things many VW people were doing to mitigate the wheel hop.
I think it is something to live with on a fwd turbo car with the powerband more down low. Hopefully others can chime in.
And not sure if the CTR forums have mentioned it, but have people swapped to stiffer motor mounts to solve wheel hop? That was one of the things many VW people were doing to mitigate the wheel hop.
I think it is something to live with on a fwd turbo car with the powerband more down low. Hopefully others can chime in.
-Andrew Wong
-
- Posts: 5
- Joined: Mon Feb 08, 2021 10:14 am
Re: Need help to resolve wheel hop issue
Thanks, Andrew. Yes, stock Continental sport contact 6. I did read about stiffer motor mount bushings. Since this is an easy and cheap project it might be worth a try.
Re: Need help to resolve wheel hop issue
What conditions are you experiencing wheel hop ?
- coolhandluke
- Posts: 3359
- Joined: Sun Aug 13, 2017 11:26 am
- Location: US
- Badge Number: 98-1040
- Contact:
Re: Need help to resolve wheel hop issue
I'm curious on learning more about this scenario and your use cases, ie spirited street driving, AutoX, HPDE's, etc. Your use cases paired with affinity or anti-affinity of sacrificing comfort for performance may guide our recommendations as well.
Type-R Expo
Current: 98-1040 Stolen 12/22/21
Previous: 98-0197, 01-0187, 98-0731, 97 #00171
Current: 98-1040 Stolen 12/22/21
Previous: 98-0197, 01-0187, 98-0731, 97 #00171
-
- Posts: 5
- Joined: Mon Feb 08, 2021 10:14 am
Re: Need help to resolve wheel hop issue
The condition: when starting off from a stop in first gear letting off the clutch gently but then hammering it .
Re: Need help to resolve wheel hop issue
01-0629 PY I think?
00-1587 from the motherland CW
17-01699 RR
00-1587 from the motherland CW
17-01699 RR
- coolhandluke
- Posts: 3359
- Joined: Sun Aug 13, 2017 11:26 am
- Location: US
- Badge Number: 98-1040
- Contact:
Re: Need help to resolve wheel hop issue
So under launch conditions, thank you.2020 type R wrote: ↑Sun Feb 28, 2021 10:22 am The condition: when starting off from a stop in first gear letting off the clutch gently but then hammering it .
What is your appetite for performance mods that decrease daily driving ride comfort?
Type-R Expo
Current: 98-1040 Stolen 12/22/21
Previous: 98-0197, 01-0187, 98-0731, 97 #00171
Current: 98-1040 Stolen 12/22/21
Previous: 98-0197, 01-0187, 98-0731, 97 #00171
Re: Need help to resolve wheel hop issue
Do you experience this on regular surface roads or track only? From my experience I can perfect a street launch on a few tries, with a track it varies every time. I never get wheel hop on the street , on a track I expect it . I also don’t have a ctr and can’t get wheel hop having the clutch up either.
Re: Need help to resolve wheel hop issue
The one day I decided to drive on a prepped drag strip surface I did on my Integra But I've always had better luck consistently launching n/a 4 cylinders...Stin1 wrote: ↑Sun Feb 28, 2021 5:14 pm Do you experience this on regular surface roads or track only? From my experience I can perfect a street launch on a few tries, with a track it varies every time. I never get wheel hop on the street , on a track I expect it . I also don’t have a ctr and can’t get wheel hop having the clutch up either.
OP, Have you also tried slipping the clutch more while you launch it? And what RPM do you launch from? It might be smoother if you can launch at a lower RPM like 3k or so too
-Andrew Wong
Who is online
Users browsing this forum: No registered users and 0 guests