Integra Type-R in Fredericksburg, TX

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
ph8ed4life
Posts: 95
Joined: Wed Nov 15, 2017 10:01 pm

Re: Integra Type-R in Fredericksburg, TX

Post by ph8ed4life » Mon May 03, 2021 2:20 pm

I would love to see if the floormats are oem or aftermarket...

MisterDA
Posts: 10
Joined: Fri Apr 23, 2021 4:50 pm

Re: Integra Type-R in Fredericksburg, TX

Post by MisterDA » Wed May 05, 2021 5:01 am

Hello, FORUM READERS...
HERE are some more photos...
(I hope these go through)

SO, this is NOT a Type-R Integra... I'm disappointed, but so be it...
Do you people think that this motor/transmission is worth saving to SWAP into a Civic, for example...⁉️

Are the floor mats original Type-R...⁉️

The sport seats are in really great condition, especially the passenger-side front seat... Anyone interested in these, as I plan on selling them... Selling the floor mats, too... (BUT, I am KEEPING the high-end Panasonic stereo...❎😝)

Also selling the taillights (NO cracks, but some minor scratches, which could be buffed out)

Also have the hatch area privacy panel and all of the plastic cover plates found in the trunk area...
Attachments
20210503_114528.jpg
20210503_114528.jpg (1.75 MiB) Viewed 1392 times
20210503_114445.jpg
20210503_114445.jpg (1.85 MiB) Viewed 1392 times
20210503_114508.jpg
20210503_114508.jpg (1.26 MiB) Viewed 1392 times
20210426_162119.jpg
20210426_162119.jpg (4.98 MiB) Viewed 1392 times
20210503_114417.jpg
20210503_114417.jpg (3.88 MiB) Viewed 1392 times
20210503_114417.jpg
20210503_114417.jpg (3.88 MiB) Viewed 1392 times

MisterDA
Posts: 10
Joined: Fri Apr 23, 2021 4:50 pm

Re: Integra Type-R in Fredericksburg, TX

Post by MisterDA » Wed May 05, 2021 5:25 am

More photos...

The last few are of my little 1999 Civic DX hatchback with only 121,000 miles...
Was my friend's Mom's car... hit a deer... Cost WAY more than the blue book value to repair it... they did not want to deal with it... I DID❗❗❗ They changed the oil every 3000 miles and just had the timing belt/water pump replaced at 118,000 miles... just about perfect/like new interior... SO blessed...❗😌
Attachments
20190704_134519.jpg
20190704_134519.jpg (3.5 MiB) Viewed 1391 times
20190405_091534.jpg
20190405_091534.jpg (2.66 MiB) Viewed 1391 times
20190808_105404.jpg
20190808_105404.jpg (3.67 MiB) Viewed 1391 times
20190612_074613.jpg
20190612_074613.jpg (4.43 MiB) Viewed 1391 times
20190128_162037_Film3.jpg
20190128_162037_Film3.jpg (8.2 MiB) Viewed 1391 times
20210225_142401.jpg
20210225_142401.jpg (3.29 MiB) Viewed 1391 times
20210225_142423.jpg
20210225_142423.jpg (4.39 MiB) Viewed 1391 times
20210424_143919.jpg
20210424_143919.jpg (2.76 MiB) Viewed 1391 times
20210423_160212.jpg
20210423_160212.jpg (4.53 MiB) Viewed 1391 times
20210408_083014.jpg
20210408_083014.jpg (3.38 MiB) Viewed 1391 times
20210423_160055.jpg
20210423_160055.jpg (3.19 MiB) Viewed 1391 times
20210426_152958.jpg
20210426_152958.jpg (2.97 MiB) Viewed 1391 times
20210423_153258.jpg
20210423_153258.jpg (3.23 MiB) Viewed 1391 times
20210423_153454.jpg
20210423_153454.jpg (2.79 MiB) Viewed 1391 times
20210426_150134.jpg
20210426_150134.jpg (4.48 MiB) Viewed 1391 times
20210225_142449.jpg
20210225_142449.jpg (2.95 MiB) Viewed 1391 times
20210407_233046.jpg
20210407_233046.jpg (2.71 MiB) Viewed 1391 times
20210423_153220.jpg
20210423_153220.jpg (3.15 MiB) Viewed 1391 times
20210426_155225.jpg
20210426_155225.jpg (2.88 MiB) Viewed 1391 times
IMG_20140204_153154.jpg
IMG_20140204_153154.jpg (986.69 KiB) Viewed 1391 times

MisterDA
Posts: 10
Joined: Fri Apr 23, 2021 4:50 pm

Re: Integra Type-R in Fredericksburg, TX

Post by MisterDA » Wed May 05, 2021 5:41 am

Hallelujah...❗😝
It looks like my photos finally DID go thru...

Having TONS of fun with my Civic project...
I realize this is an Integra forum, but just wanted to share my experience getting this car together... I do not have a welder or extensive body shop experience... BUT, I do know where the Great junk yards in my area are located... And my friend at Metal Recycling has giving me great prices on many many many Honda parts... So blessed... Planning on putting in the brand-new headlights, today...
Thanks for listening...
Donald
Attachments
20190805_200033.jpg
20190805_200033.jpg (2.52 MiB) Viewed 1389 times
20210225_142333.jpg
20210225_142333.jpg (3.2 MiB) Viewed 1389 times
20190405_091547.jpg
20190405_091547.jpg (2.11 MiB) Viewed 1389 times
20210504_205713.jpg
20210504_205713.jpg (2.73 MiB) Viewed 1389 times
20190326_233535.jpg
20190326_233535.jpg (2.01 MiB) Viewed 1389 times
20190424_221336.jpg
20190424_221336.jpg (4.24 MiB) Viewed 1389 times
20190823_191940.jpg
20190823_191940.jpg (2.6 MiB) Viewed 1389 times
20210204_095227.jpg
20210204_095227.jpg (2.6 MiB) Viewed 1389 times
20190808_105441.jpg
20190808_105441.jpg (3.49 MiB) Viewed 1389 times
20201117_165808.jpg
20201117_165808.jpg (2.85 MiB) Viewed 1389 times
20190702_110727.jpg
20190702_110727.jpg (3.21 MiB) Viewed 1389 times
20190522_192740.jpg
20190522_192740.jpg (3.51 MiB) Viewed 1389 times
20190823_173842.jpg
20190823_173842.jpg (2.55 MiB) Viewed 1389 times
20210131_071721.jpg
20210131_071721.jpg (2.42 MiB) Viewed 1389 times
20190823_171243.jpg
20190823_171243.jpg (2.86 MiB) Viewed 1389 times
20190505_104307.jpg
20190505_104307.jpg (1.86 MiB) Viewed 1389 times
20210408_083215.jpg
20210408_083215.jpg (2.74 MiB) Viewed 1389 times
20210204_094925.jpg
20210204_094925.jpg (3.85 MiB) Viewed 1389 times
20190213_083756_Film3.jpg
20190213_083756_Film3.jpg (4.31 MiB) Viewed 1389 times
20190222_191412_Film3.jpg
20190222_191412_Film3.jpg (5.43 MiB) Viewed 1389 times

touringteg
Posts: 346
Joined: Thu Aug 17, 2017 11:34 pm

Re: Integra Type-R in Fredericksburg, TX

Post by touringteg » Wed May 05, 2021 4:22 pm

The floor mats look to be real 97-00 USDM Integra Type R floor mats. That's a score right there. That's the only genuine parts I see.

The shift knob is not Type R.
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM

Dave7CDMTYPER
Posts: 1096
Joined: Tue Aug 15, 2017 2:17 am
Location: US
Badge Number: 01-1322

Re: Integra Type-R in Fredericksburg, TX

Post by Dave7CDMTYPER » Wed May 05, 2021 11:54 pm

Yea looks like "checkered" floormats, nice find. :thumbup:
ITR CDM 01-1322
2001 GS-R
I have badge #00-1259 in hand.

ph8ed4life
Posts: 95
Joined: Wed Nov 15, 2017 10:01 pm

Re: Integra Type-R in Fredericksburg, TX

Post by ph8ed4life » Thu May 06, 2021 10:19 am

Full set of four mats? And, I’m sure you would have mentioned it, any chance there was a trunk mat in there too?

MisterDA
Posts: 10
Joined: Fri Apr 23, 2021 4:50 pm

Re: Integra Type-R in Fredericksburg, TX

Post by MisterDA » Mon May 10, 2021 7:22 am

Hello, Type-R Forum READERS...

SO, these are "REAL" Type-R floor mats...⁉️🤔 I am planning on trying to clean them up a little bit... Is anyone interested in obtaining them (they don't fit my civic-but anyway, I made my own mats from a Dollar General area rug, from which I cut out my four mats and then sealed the edges with a lighter flame)⁉️ MAKE ME AN 💰OFFER💰❗I'm located in central Texas... They could be shipped out to you...
NO, unfortunately there was no trunk mat, BUT, I did grab the hatch-area privacy panel (just about perfect condition), AND all of the small plastic trim panels that allow access for changing taillight bulbs, etc.
ALSO, I am selling the front seats... I'm away from home til May 16 (up in Wisconsin for Mother's Day week), but I can post pictures of them when I get back. I have all of the seat mounting bolts and the plastic trim pieces, too.

Once again I will ask... is ANYBODY interested in this Integra motor and transmission to swap into their Civic, for example... Yes, it's NOT Type-R, BUT it has more horsepower than a Civic motor... Again, Metal Recycling is going to crush this car and the motor is going to go to waste... Like I said, my friend works there and I believe he would make somebody a really good deal on this motor/trans combo... Whenever I need something he sells it to me at a ridiculously low price... the parts mean little to them other than the metal scrap value... But to me, used Honda parts are like GOLD...❗ I was able to get just about everything I needed and more to fix up my little Honda Civic and plus now I've got extra parts like an extra starter extra radiator extra alternator extra fuel injectors fuel pump sensors just about everything... I stripped that car (the Civic that they had a few months ago) of everything good and then they crushed it.

PLEASE LET ME KNOW ABOUT OBTAINING ANY OF MY INTEGRA PARTS...

Thankyou...
Donald
(414)213-8035
vegetarianpimp@yahoo.com
😌

I have FINISHED (finally, HALLELUJAH❗) my Civic project... Maiden voyage is a 1300 mile trip to visit Mom...
Wouldn't be here without Her...❗
Got 36 mpg, with my Ruthinium spark plugs... Here are a few pictures of the Civic... Thanks for listening...
Attachments
20210506_123135.jpg
20210506_123135.jpg (1.17 MiB) Viewed 1345 times
20210507_114743.jpg
20210507_114743.jpg (3.49 MiB) Viewed 1345 times
20210509_084130.jpg
20210509_084130.jpg (1.75 MiB) Viewed 1345 times
20210506_105119.jpg
20210506_105119.jpg (4.73 MiB) Viewed 1345 times
20190823_191940.jpg
20190823_191940.jpg (2.6 MiB) Viewed 1345 times
20210507_102333.jpg
20210507_102333.jpg (2.41 MiB) Viewed 1345 times
20210506_101724.jpg
20210506_101724.jpg (4.03 MiB) Viewed 1345 times
20210506_105055.jpg
20210506_105055.jpg (3.31 MiB) Viewed 1345 times
20210224_201851.jpg
20210224_201851.jpg (2.13 MiB) Viewed 1345 times
20210509_092027.jpg
20210509_092027.jpg (2.19 MiB) Viewed 1345 times
20210507_114743.jpg
20210507_114743.jpg (3.49 MiB) Viewed 1345 times
20210509_092027.jpg
20210509_092027.jpg (2.19 MiB) Viewed 1345 times

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 0 guests