1996 DB8 advice

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Post Reply
strtkar
Posts: 2
Joined: Wed Jul 07, 2021 4:19 pm
Location: Mentor, OH

1996 DB8 advice

Post by strtkar » Thu Jul 08, 2021 9:50 am

Hey everyone, new member here! I saw and drove a recently imported 96 4 door Type R at the dealership while dropping my car off for service. It piqued my interest, but I don't know much about the cars. Is it safe to assume that most of the parts (aside from the 4-door specific stuff) from the US DC2 Type R's will fit the car (e.g. filters, brake pads, engine parts)? I am considering buying the car, but concerned about maintenance/parts issues.
Thanks in advance!

G.
Attachments
db8hitr.jpg
db8hitr.jpg (437.39 KiB) Viewed 437 times
04 Evo VIII - my first
19 MB E63 Wagon - the workhorse
18 Spec Miata - the track beater

User avatar
jayhaire
Site Admin
Posts: 741
Joined: Mon Aug 07, 2017 10:24 pm
Location: Chicago
Badge Number: 97 #00151
Contact:

Re: 1996 DB8 advice

Post by jayhaire » Thu Jul 08, 2021 10:46 pm

strtkar wrote: Thu Jul 08, 2021 9:50 am Hey everyone, new member here! I saw and drove a recently imported 96 4 door Type R at the dealership while dropping my car off for service. It piqued my interest, but I don't know much about the cars. Is it safe to assume that most of the parts (aside from the 4-door specific stuff) from the US DC2 Type R's will fit the car (e.g. filters, brake pads, engine parts)? I am considering buying the car, but concerned about maintenance/parts issues.
Thanks in advance!

G.
That was for sale at a dealership? Wow...that's kind of rare.

I've owned a 96-spec DB8 ITR for over 10 years and can assist. Most parts are the same, but not all.
Brake pads are GS-R sized on 96-spec, but you can upgrade to 98-spec. I wrote a how-to here:
viewtopic.php?f=8&t=31
This upgrade is useful for sourcing rotors too. The 96-spec 4x114 rotors are hard to find.

Clutch line fittings are smaller, battery posts are smaller, different alternator belt size (but available easily), etc.

They're fun (and rare) cars!
:hammer:

strtkar
Posts: 2
Joined: Wed Jul 07, 2021 4:19 pm
Location: Mentor, OH

Re: 1996 DB8 advice

Post by strtkar » Fri Jul 09, 2021 8:55 am

jayhaire wrote: Thu Jul 08, 2021 10:46 pm That was for sale at a dealership? Wow...that's kind of rare.

I've owned a 96-spec DB8 ITR for over 10 years and can assist. Most parts are the same, but not all.
Brake pads are GS-R sized on 96-spec, but you can upgrade to 98-spec. I wrote a how-to here:
viewtopic.php?f=8&t=31
This upgrade is useful for sourcing rotors too. The 96-spec 4x114 rotors are hard to find.

Clutch line fittings are smaller, battery posts are smaller, different alternator belt size (but available easily), etc.

They're fun (and rare) cars!
It was a lot of fun on the test drive. It took a few minutes to get used to being on the wrong side of the lane and shifting the manual at the same time, luckily it's such a narrow car I stayed in the lane :lol:

That is very helpful information. How did you get yours into the US so early? The dealership said they bought the car a few months ago but it sat in Japan for a bit while they timed shipping so it arrived in June and was 25yrs old.

I'm not sure I can convince the wife that we need another toy in the garage, which has no space for it :(
04 Evo VIII - my first
19 MB E63 Wagon - the workhorse
18 Spec Miata - the track beater

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest