No longer available
No longer available
All of the restoration parts and majority the Type R specific interior parts have been sold..
This posting is now only for the shell and parts listed...
The shell===4brands on title===badge number unknown===florida title in hand===has original HONDA windshield===stripped down to bare metal and primed===CHASSIS HARNESS HAS BEEN HEAVILY MODIFIED AND IS SETUP TO USE K SERIES ENGINE HARNESS ONLY AND CONVERSION HARNESS IS INCLUDED===has had extensive repairs in the past including JDM front end conversion(i have the USDM front end with OEM parts (no lip)), rear valence panel has been replaced in the past and currently has 3 small sections cut out in need of repair , quarter panel damage pass side, multiple body panels in need of repair, antenna hole welded closed, NON TYPE R DOORS, partially shaved engine bay, brake tuck(holes drilled through firewall and front wheel wells for bulkheads), pass side trans mount bracket cut out for k series swap, tunnel has been cut for k series drop down box to retain original center console in interior, has jdm 36mm 5 lug setup, VIN matching dash(no other VIN matching parts or panels), JDM wiperless hatch.
suspension===NO FRONT STRUT BAR===has older HKS coilovers, new outer tie rods, 36mm 5 lug with brand new HONDA lower ball joints with national bearings and aftermarket hubs just installed in fresh blasted/painted spindles, all hardrace bushings except rear lower control arms(tubular upper control arms, lower control arms, compliance bushings, camber and toe arms, rear trailing arms, traction bar) rear and lower tie bars are included
body===currently stripped down with no seals/cowl/weatherstripping,quarter glasses===i have all the body parts to put the car back together including OEM radiator core support, front and rear bumper reinforcement bars, fenders, front bumper, hood, rear bumper, side skirts, bumper filler, JDM hatch/spoiler, headlights, taillights.
spare body parts included
OEM 94-97 rear bumper
R-DOT 98-01 rear bumper
OEM Side skirts
Seibon carbon fiber hood
L and R door glass
OEM 94-97 mud flaps
interior===completely removed from vehicle currently===NO FRONT SEATS===NO DOOR PANELS===NO ARMREST===NO HEADLINER===NO VISORS===NO RADIO===NO STEERING WHEEL===NO REAR SEATS===NO CLUSTER===NO CLOCK
This posting is now only for the shell and parts listed...
The shell===4brands on title===badge number unknown===florida title in hand===has original HONDA windshield===stripped down to bare metal and primed===CHASSIS HARNESS HAS BEEN HEAVILY MODIFIED AND IS SETUP TO USE K SERIES ENGINE HARNESS ONLY AND CONVERSION HARNESS IS INCLUDED===has had extensive repairs in the past including JDM front end conversion(i have the USDM front end with OEM parts (no lip)), rear valence panel has been replaced in the past and currently has 3 small sections cut out in need of repair , quarter panel damage pass side, multiple body panels in need of repair, antenna hole welded closed, NON TYPE R DOORS, partially shaved engine bay, brake tuck(holes drilled through firewall and front wheel wells for bulkheads), pass side trans mount bracket cut out for k series swap, tunnel has been cut for k series drop down box to retain original center console in interior, has jdm 36mm 5 lug setup, VIN matching dash(no other VIN matching parts or panels), JDM wiperless hatch.
suspension===NO FRONT STRUT BAR===has older HKS coilovers, new outer tie rods, 36mm 5 lug with brand new HONDA lower ball joints with national bearings and aftermarket hubs just installed in fresh blasted/painted spindles, all hardrace bushings except rear lower control arms(tubular upper control arms, lower control arms, compliance bushings, camber and toe arms, rear trailing arms, traction bar) rear and lower tie bars are included
body===currently stripped down with no seals/cowl/weatherstripping,quarter glasses===i have all the body parts to put the car back together including OEM radiator core support, front and rear bumper reinforcement bars, fenders, front bumper, hood, rear bumper, side skirts, bumper filler, JDM hatch/spoiler, headlights, taillights.
spare body parts included
OEM 94-97 rear bumper
R-DOT 98-01 rear bumper
OEM Side skirts
Seibon carbon fiber hood
L and R door glass
OEM 94-97 mud flaps
interior===completely removed from vehicle currently===NO FRONT SEATS===NO DOOR PANELS===NO ARMREST===NO HEADLINER===NO VISORS===NO RADIO===NO STEERING WHEEL===NO REAR SEATS===NO CLUSTER===NO CLOCK
Last edited by DC231 on Tue Jul 19, 2022 6:35 pm, edited 8 times in total.
Re: 97 salvage title shell JACKSONVILLE FL
I’d be willing to buy all those parts if you separate- but obviously not at “2022” for every single piece - more a bulk buy
What’s deal with the PY shell in pics? You selling that too?
What’s deal with the PY shell in pics? You selling that too?
Re: 97 salvage title shell JACKSONVILLE FL
I'd be willing to sell everything besides the shell itself. PM me what you want and what you're offering
It could be. I have a price for everything including both cars as well
Re: 97 salvage title shell JACKSONVILLE FL
What year is engine harness ?
Who is online
Users browsing this forum: No registered users and 0 guests