98r restoration questions

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Post Reply
Vtecwreck
Posts: 181
Joined: Tue Aug 15, 2017 4:49 pm

98r restoration questions

Post by Vtecwreck » Sun Aug 06, 2023 2:19 pm

Hi, I’m currently putting my caR back together and have a few questions. I figured I’d make a thread here and update it as I go in hopes it could potentially be useful for others.

Evap question + harness clips

I’ve noticed that my canister has a provision for a hose on the back. However, I do not have a hose that would go attached there. Can anyone confirm if there actually is a hose that goes here, maybe from the intake?
86E81F9F-1434-4E0E-AA11-4AB072021791.jpeg
86E81F9F-1434-4E0E-AA11-4AB072021791.jpeg (3.09 MiB) Viewed 2225 times
Secondly, I’m sure anyone doing a Honda restoration has come across this problem; harness clips. Does anyone happen to know where we can find them, Honda has long discontinued them. I do remember seeing someone list them on a fb page but they were gatekeeping the vendor. Oem grade would be ideal but something similar would work too!
38A3BBF6-2561-4F9A-ABD2-9C919304A313.jpeg
38A3BBF6-2561-4F9A-ABD2-9C919304A313.jpeg (2.42 MiB) Viewed 2225 times
98-0148: DeRicing Project
viewtopic.php?f=5&t=264

navin
Posts: 49
Joined: Mon Aug 14, 2017 9:54 am

Re: 98r restoration questions

Post by navin » Mon Aug 07, 2023 10:24 am


User avatar
oddomatik
Posts: 171
Joined: Fri Sep 10, 2021 5:57 pm
Location: NorCal
Badge Number: 98-0542
Contact:

Re: 98r restoration questions

Post by oddomatik » Mon Aug 07, 2023 12:00 pm

Vtecwreck wrote: Sun Aug 06, 2023 2:19 pm I’ve noticed that my canister has a provision for a hose on the back. However, I do not have a hose that would go attached there. Can anyone confirm if there actually is a hose that goes here, maybe from the intake?
As far as I know, my '98 USDM EVAP system is untouched, and it has the same unused hose provision. I can't solve any mysteries as to what it's for, but I don't think it's used.

Here it is on parts diagrams if it can help.
ITR (98-0542) | NA1 NSX | RT4WD | EK Hatch
240z | 190E 2.3-16V | SpecE30 | RAM 3500 | CB550

User avatar
oddomatik
Posts: 171
Joined: Fri Sep 10, 2021 5:57 pm
Location: NorCal
Badge Number: 98-0542
Contact:

Re: 98r restoration questions

Post by oddomatik » Mon Aug 07, 2023 12:14 pm

Vtecwreck wrote: Sun Aug 06, 2023 2:19 pm ure anyone doing a Honda restoration has come across this problem; harness clips. Does anyone happen to know where we can find them, Honda has long discontinued them. I do remember seeing someone list them on a fb page but they were gatekeeping the vendor. Oem grade would be ideal but something similar would work too!
91558-ST5-003 for both USDM and JDM - You'll find those pieces in the "Engine Wiring Harness" section as @navin pointed out. You can find aftermarket replacements on eBay (can't vouch for these though)
ITR (98-0542) | NA1 NSX | RT4WD | EK Hatch
240z | 190E 2.3-16V | SpecE30 | RAM 3500 | CB550

Vtecwreck
Posts: 181
Joined: Tue Aug 15, 2017 4:49 pm

Re: 98r restoration questions

Post by Vtecwreck » Tue Sep 19, 2023 8:54 pm

navin wrote: Mon Aug 07, 2023 10:24 am The clips aren't discontinued. .

https://www.acuraautomotiveparts.org/v- ... ss-clamp-2
You’re right, thanks!
oddomatik wrote: Mon Aug 07, 2023 12:00 pm
As far as I know, my '98 USDM EVAP system is untouched, and it has the same unused hose provision. I can't solve any mysteries as to what it's for, but I don't think it's used.

Here it is on parts diagrams if it can help.
Great, I’ve been referencing BAT listings but none have pictures of the Evap Canister. Thank you!
oddomatik wrote: Mon Aug 07, 2023 12:14 pm
91558-ST5-003 for both USDM and JDM - You'll find those pieces in the "Engine Wiring Harness" section as @navin pointed out. You can find aftermarket replacements on eBay (can't vouch for these though)
Thank you! The aftermarket clips are not to my liking. I do have a few spare harnesses that I may take the clips from if I can find any that are not discolored. Otherwise I’ll put an order in.
98-0148: DeRicing Project
viewtopic.php?f=5&t=264

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests