98-0940 Anyone know anything about the caR?

[Stin1]

IMG_1590.JPG (238.29 KiB) Viewed 1716 times

IMG_1592.JPG (270.77 KiB) Viewed 1716 times

The jdm radiator vs usdm. The jdm is in the car.

IMG_1591.JPG (197.07 KiB) Viewed 1716 times

IMG_1593.JPG (312.92 KiB) Viewed 1716 times

[Stin1]

IMG_1820.JPG (488.94 KiB) Viewed 1716 times

This is sort of relevant to our cars. I had problems shifting the other night the floor mat moved which I thought was odd because it was anchored in. The anchor broke! The anchor is the same part for the integra. This part was installed in April. I have never seen one fail. Weird.

IMG_1819.JPG (297.61 KiB) Viewed 1716 times

IMG_1818.JPG (337.33 KiB) Viewed 1716 times

[Stin1]

IMG_1723.JPG (423.84 KiB) Viewed 1716 times

Bad luck lately. This happened to my daily driver tire

[Stin1]

IMG_0534.JPG (192.41 KiB) Viewed 1716 times

A screenshot my brother sent from ipg James.

[Stin1]

I went type R ing today. Sixty miles no check engine light. The evap readiness monitor is still not ready. This doesn't surprise me . I don't drive it much and the temps haven't dipped below 80 and exceed 105 . I had a good time. Car drove great.

IMG_1808.JPG (573.53 KiB) Viewed 1716 times

IMG_1809.JPG (570.17 KiB) Viewed 1716 times

[Stin1]

IMG_1812.JPG (589.72 KiB) Viewed 1716 times

IMG_1811.JPG (571.75 KiB) Viewed 1716 times

[Stin1]

IMG_1813.JPG (602.08 KiB) Viewed 1716 times

IMG_1815.JPG (619.78 KiB) Viewed 1716 times

IMG_1816.JPG (605.93 KiB) Viewed 1716 times

[Stin1]

IMG_1750.JPG (141.66 KiB) Viewed 1716 times

dc231 was the devil on my shoulder and sent me this picture. So I had to get one myself. I also got the ignition/ steering cover which I already planned on. Mine has a hole from a led for a alarm. All these parts were expected the next day out of la to az . Instead it took about two weeks. All three parts were cross shipped from everywhere. The third arrived yesterday. I may install these tomorrow morning.

IMG_1805.JPG (309.5 KiB) Viewed 1716 times

[touringteg]

I am dealing with a p1457 as well since May. I have a 2001 which has a different cannister and evap purge valve. I borrowed spares from a local ITR owner and my cel still keeps coming back. Replaced gas gap, no dice. Cleaned and capped off the bypass valve on the firewall, no dice.

I am taking it to a second shop next Thursday for a smoke test.

The cel is driving me crazy.

[Stin1]

That sucks. My brother's shop doesn't have a smoke machine. So far that light was out. Do you smell anything? I would smell rotten eggs when the light would come on . When the plug wire broke it smelled like charcoal and rotten eggs. Like really bad. Really really bad for about a minute. After that happened the light was turning on quite often. When I got the car no charcoal canister was installed or a cat. It really smelled.