Any decent 15x7 wheel options anymore?

[boostjunkie33]

Just saw these OEM EDM 15”, seller claims original finish. Figured I’d share.


https://rover.ebay.com/rover/0/0/0?mpre ... 3928997120

Cool wheels but I always thought they looked small on the car. My buddy rocked them a few years ago. They looked funny on his teg but looked a bit better on his eg.

[Dave7CDMTYPER]

Not sure if mentioned yet, but apparently Desmond is gonna make new evo wheels in sizes 16in and 15in in the next few years.

[coolhandluke]

Not sure if mentioned yet, but apparently Desmond is gonna make new evo wheels in sizes 16in and 15in in the next few years.

Slight correction, ICB purchased Desmond's intellectual property. ICB redesigned the wheels and are re-releasing. Their website shows 18'' available currently, which fit the FK8 Civic Type R.

[Dave7CDMTYPER]

Not sure if mentioned yet, but apparently Desmond is gonna make new evo wheels in sizes 16in and 15in in the next few years.

Slight correction, ICB purchased Desmond's intellectual property. ICB redesigned the wheels and are re-releasing. Their website shows 18'' available currently, which fit the FK8 Civic Type R.

Oh no way! That's awesome, hopefully that means there's a good chance of getting ITR spec.

[blueprint]

I was able to fit 15x8 +38 TE37 on my ITR without rolling the fenders.

[Lturner]

I was able to fit 15x8 +38 TE37 on my ITR without rolling the fenders.

Beautiful!

Stock suspension? Looks lowered.

[blueprint]

I was able to fit 15x8 +38 TE37 on my ITR without rolling the fenders.

Beautiful!

Stock suspension? Looks lowered.

Im on GC Coilovers. -2.2 camber up front. -2.0 in the rear.

[carpayments4life]

Would rpf1s in 5x114 in 15in clear? I'm 4 lug and the +35 and +41 offset didn't clear the factory r calipers.

I have Type R brakes (front and rear complete Honda parts, which have the brackets cut, by 3mm) on my 2000 LS, with the original 4x100 hubs.

I've heard that Enkei RPF1's will not clear the type r calipers.

I read that 949 Racing dot com sells a 6UL 15x7 36mm that will clear the type r calipers, when the Mini Club front rotors are used (these rotors do not require the brackets to be cut).

Does anyone know if the 949 Racing rims...6UL 15 x 6 40mm will clear my Honda set of type r calipers?

Look at the 2nd paragraph of this link: https://www.team-integra.net/forum/19-p ... s-gsr.html

[blueprint]

Would rpf1s in 5x114 in 15in clear? I'm 4 lug and the +35 and +41 offset didn't clear the factory r calipers.

I have Type R brakes (front and rear complete Honda parts, which have the brackets cut, by 3mm) on my 2000 LS, with the original 4x100 hubs.

I've heard that Enkei RPF1's will not clear the type r calipers.

I read that 949 Racing dot com sells a 6UL 15x7 36mm that will clear the type r calipers, when the Mini Club front rotors are used (these rotors do not require the brackets to be cut).

Does anyone know if the 949 Racing rims...6UL 15 x 6 40mm will clear my Honda set of type r calipers?

Look at the 2nd paragraph of this link: https://www.team-integra.net/forum/19-p ... s-gsr.html

Aren't 6UL in 15" 4 lug only??

[carpayments4life]

Yes, 6UL are 4x100, but I have ITR front & rear brake upgrade.

My OEM Mesh wheels clear this brake upgrade.
I believe that 6UL 15 x 7 36mm barrel will also clear and the tires won't hit the fender.
I don't know if 6UL 15 x 6 40mm will clear my ITR brakes and my tires miss the fenders.