Page 2 of 4
Re: Integra Refresh Program by MITA Motorsports
Posted: Fri Dec 24, 2021 10:46 pm
by Stin1
Why is it listed as Oem ? Some of the listed items state that it is their product and others are listed as Oem . Is everything their product or also Oem ?
Re: Integra Refresh Program by MITA Motorsports
Posted: Fri Dec 24, 2021 11:03 pm
by aklackner
My understanding is they specialize in reverse engineering OEM parts to OEM grade, in some cases correcting engineering issues. They’ve partnered with NSX community with considerable success filling demand for discontinued and flawed OEM parts.
I’ve also ordered the carpet in addition to the windshield moldings. I’ll share thoughts as parts are received.
Re: Integra Refresh Program by MITA Motorsports
Posted: Sat Dec 25, 2021 12:26 am
by g3teg97
I ordered the turn signals and shift boot. Think I'll be ordering the moldings too. Shipping fee is $45, which sucks but I guess they are based in Japan.
Re: Integra Refresh Program by MITA Motorsports
Posted: Sat Dec 25, 2021 2:23 am
by Klasse
Pretty sure the moldings, shift boot and switches are OEM since you can get that stuff from Honda anyway. Parts listed as "Mita" are their own. Will be following closely to see what else they produce!
Re: Integra Refresh Program by MITA Motorsports
Posted: Mon Dec 27, 2021 5:37 pm
by yoshi234
This is great!!!!
y
shi - who hopes they will make the windshield cowl, L&R window run channels and airbag tray
Re: Integra Refresh Program by MITA Motorsports
Posted: Mon Dec 27, 2021 7:00 pm
by aklackner
yoshi234 wrote:This is great!!!!
y
shi - who hopes they will make the windshield cowl, L&R window run channels and airbag tray
I’ve been chatting with them since my orders and offered to help them help the community in any way I can. You might notice a familiar car on their main home page now which is extremely flattering.
There’s a few items I’ve encouraged them to explore including the cowl end/hinge seals which I don’t believe have ever been available separately and aren’t included on carbon options I’ve seen. I also asked for door sills as it will help with carpet install, and also the captured nuts, which the toe adjustment arm bolts to as it’s another small part that isn’t available and commonly an issue when a car has seen wet road conditions.
I suspect sooner or later we’ll need a source for all the seals, including rear window surround. For window run channels which part are you looking for? One of the seals, guide that screws on to the upper door, or the stick on strip that covers the guide screws?
Re: Integra Refresh Program by MITA Motorsports
Posted: Mon Dec 27, 2021 7:37 pm
by yoshi234
aklackner wrote: ↑Mon Dec 27, 2021 7:00 pm
You might notice a familiar car on their main home page now which is extremely flattering.
I suspect sooner or later we’ll need a source for all the seals, including rear window surround. For window run channels which part are you looking for? One of the seals, guide that screws on to the upper door, or the stick on strip that covers the guide screws?
yep, saw your car on their IG
I grabbed this pic from an old post at HT by "Tom B"
On the passenger side the rubber has deformed near the side mirror
y
shi - who's not too concerned about it but it'd be nice to replace with a freshie
Re: Integra Refresh Program by MITA Motorsports
Posted: Tue Dec 28, 2021 3:31 pm
by oddomatik
Oh shit. Plug for MITA, I have their NSX exhaust, door lining plastics, tweeter pods... While shipping air freight is a bit expensive, they do quality work and I'm excited to see what products will be developed for the Integra.
Re: Integra Refresh Program by MITA Motorsports
Posted: Wed Dec 29, 2021 7:20 pm
by SlothKing
aklackner wrote: ↑Mon Dec 27, 2021 7:00 pm
yoshi234 wrote:This is great!!!!
y
shi - who hopes they will make the windshield cowl, L&R window run channels and airbag tray
I’ve been chatting with them since my orders and offered to help them help the community in any way I can. You might notice a familiar car on their main home page now which is extremely flattering.
There’s a few items I’ve encouraged them to explore including the cowl end/hinge seals which I don’t believe have ever been available separately and aren’t included on carbon options I’ve seen. I also asked for door sills as it will help with carpet install, and also the captured nuts, which the toe adjustment arm bolts to as it’s another small part that isn’t available and commonly an issue when a car has seen wet road conditions.
I suspect sooner or later we’ll need a source for all the seals, including rear window surround. For window run channels which part are you looking for? One of the seals, guide that screws on to the upper door, or the stick on strip that covers the guide screws?
Wish I knew about this sooner! Also, I love their main page photo.
I'd love to see if we can source all the seals soon. I'm about ready to take apart my ITR for a full repaint and refresh so I'd love to get new moldings and seals when putting it back together.
Re: Integra Refresh Program by MITA Motorsports
Posted: Sun Jan 02, 2022 1:16 pm
by 9701TypeR
yoshi234 wrote: ↑Mon Dec 27, 2021 7:37 pm
aklackner wrote: ↑Mon Dec 27, 2021 7:00 pm
You might notice a familiar car on their main home page now which is extremely flattering.
I suspect sooner or later we’ll need a source for all the seals, including rear window surround. For window run channels which part are you looking for? One of the seals, guide that screws on to the upper door, or the stick on strip that covers the guide screws?
yep, saw your car on their IG
I grabbed this pic from an old post at HT by "Tom B"
On the passenger side the rubber has deformed near the side mirror
y
shi - who's not too concerned about it but it'd be nice to replace with a freshie
You are looking for a R run channel, which is discontinued.