Page 12 of 29

Re: VSM ITR build 01-0388

Posted: Wed Jan 08, 2020 12:58 am
by PeteTheCarFreak
That exhaust system looks nice, I love the tip style!

Re: VSM ITR build 01-0388

Posted: Fri Jan 10, 2020 3:18 pm
by Stin1
aklackner wrote: Sun Jan 05, 2020 2:27 pm A lot of the clips for the plastic covers on mine were stuck and damaged during removal so you may want to plan to replace them (center plastic screw with expansion surround).

I think helms calls for replacing hose clamps too.
[fquote=aklackner post_id=11649 time=1578256058 user_id=403]
A lot of the clips for the plastic covers on mine were stuck and damaged during removal so you may want to plan to replace them (center plastic screw with expansion surround).

I think helms calls for replacing hose clamps too.
[/quote]
This without removing the tank ? I was hoping on just replacing the straps and hardware. I have the manual and should have probably looked. I did the under tank valves already. As you stated I don’t see the white valve on the 98 diagram.

Re: VSM ITR build 01-0388

Posted: Fri Jan 10, 2020 8:03 pm
by aklackner
No I think the clamps only need to be replaced if replacing/disconnecting the fill hoses. For some reason I thought you were swapping the tank not just the straps.

Re: VSM ITR build 01-0388

Posted: Sun Jan 12, 2020 9:58 pm
by Insidiouseg6
PeteTheCarFreak wrote: Wed Jan 08, 2020 12:58 am That exhaust system looks nice, I love the tip style!
Yeah man, tip almost looks OEM! The quality is superb.

Re: VSM ITR build 01-0388

Posted: Sun Jan 12, 2020 10:07 pm
by Insidiouseg6
Picked up a Crow 6 point harness for the driver side. Liked that they are somewhat local and can be sent in for recertification when they expire.
Image

Tried the TE's on the car. Love that they're original finish and are in great shape but I may have to refinish them down the road. Not sure about the silver and white. Bronze maybe?
Image
Image

Re: VSM ITR build 01-0388

Posted: Sun Jan 12, 2020 11:30 pm
by PeteTheCarFreak
I think the white will look great on silver!

Re: VSM ITR build 01-0388

Posted: Mon Jan 13, 2020 10:01 am
by coolhandluke
Insidiouseg6 wrote: Sun Jan 12, 2020 10:07 pm Picked up a Crow 6 point harness for the driver side. Liked that they are somewhat local and can be sent in for recertification when they expire...
I didn't realize they were in the US, much less NorCal. That is a perk. :thumbup:
Insidiouseg6 wrote: Sun Jan 12, 2020 10:07 pm ...Tried the TE's on the car. Love that they're original finish and are in great shape but I may have to refinish them down the road. Not sure about the silver and white. Bronze maybe?
Image
Image
I dig the white on silver. I vote get the car on the road, enjoy the car, and refinish down the road if the white doesn't "grow" on you.

Re: VSM ITR build 01-0388

Posted: Mon Jan 13, 2020 3:22 pm
by Insidiouseg6
PeteTheCarFreak wrote: Sun Jan 12, 2020 11:30 pm I think the white will look great on silver!
I may just have to see it on the ground.
coolhandluke wrote: Mon Jan 13, 2020 10:01 am
Insidiouseg6 wrote: Sun Jan 12, 2020 10:07 pm Picked up a Crow 6 point harness for the driver side. Liked that they are somewhat local and can be sent in for recertification when they expire...
I didn't realize they were in the US, much less NorCal. That is a perk. :thumbup:
Insidiouseg6 wrote: Sun Jan 12, 2020 10:07 pm ...Tried the TE's on the car. Love that they're original finish and are in great shape but I may have to refinish them down the road. Not sure about the silver and white. Bronze maybe?
Image
Image
I dig the white on silver. I vote get the car on the road, enjoy the car, and refinish down the road if the white doesn't "grow" on you.
They are down in So Cal but close enough! Lol. And yeah that was my plan, see if they'll grow on me after some time.

Re: VSM ITR build 01-0388

Posted: Tue Jan 14, 2020 9:36 pm
by EL*Chuy
Insidiouseg6 wrote: Sun Jan 12, 2020 10:07 pm Picked up a Crow 6 point harness for the driver side. Liked that they are somewhat local and can be sent in for recertification when they expire.
Image

Tried the TE's on the car. Love that they're original finish and are in great shape but I may have to refinish them down the road. Not sure about the silver and white. Bronze maybe?
Image
Image
I like that they offer all black hardware as an option, plus a military discount :thumbup:

Re: VSM ITR build 01-0388

Posted: Sun Jan 19, 2020 4:13 pm
by Insidiouseg6
EL*Chuy wrote: Tue Jan 14, 2020 9:36 pm
Insidiouseg6 wrote: Sun Jan 12, 2020 10:07 pm Picked up a Crow 6 point harness for the driver side. Liked that they are somewhat local and can be sent in for recertification when they expire.
Image

Tried the TE's on the car. Love that they're original finish and are in great shape but I may have to refinish them down the road. Not sure about the silver and white. Bronze maybe?
Image
Image
I like that they offer all black hardware as an option, plus a military discount :thumbup:
Sup Chuy! Yeah the all black Option was a must! How are your builds doing?