Type R Club of America

The alpine round was also to have l&r swapped vs. the Honda version on the cable.

Using this hooked up the OE radio: http://www.oemautosound.com/p-8-honda-a ... n-aux.aspx

Using their RCA cables to AUX input cable as well -- tried swapping the red/white plugs on RCA input and still no change in sound output. Also when using the radio it only sounds like its coming from the driverside front as well.

Stin1 wrote: ↑Thu May 28, 2020 4:38 pm The alpine round was also to have l&r swapped vs. the Honda version on the cable.

What's the alpine round?

navin wrote: ↑Thu May 28, 2020 10:01 pm

Stin1 wrote: ↑Thu May 28, 2020 4:38 pm The alpine round was also to have l&r swapped vs. the Honda version on the cable.

What's the alpine round?

There’s 2 cd changer ports . The later Hondas use a square plug like every Honda connection. The 98 uses a round plug. It’s a alpine plug used in many other models , including European radios.

Here’s the alpine or itr port for a cd changer or tape deck.

* for

hmm that should have worked with the audio, Im curious why you are having issues. This was the one I am using on my car
https://www.blitzsafe.com/catalog/hon-/-aux-v-1.html

Looks like blitzsafe has a few different options
https://www.blitzsafe.com/catalog/1992-1998.html

The picture stin1 is showing what I have on my 2000 integra.

Actually you are correct -- I ordered from oemautosound, but was shipped a Blitzsafe item. This one: https://www.blitzsafe.com/catalog/hon-/-aux-v-1.html

I'm almost thinking the internal amp in the ITR radio is busted?

edit: and yes I've tried to adjust the balance as well to test if that was the problem