Page 33 of 84
Re: Dumb, Stubborn, and bound to end up penniless…….
Posted: Sun Sep 08, 2019 3:24 pm
by Dave7CDMTYPER
Those undercarriage panels look nice.
Re: Dumb, Stubborn, and bound to end up penniless…….
Posted: Sun Sep 08, 2019 7:54 pm
by aklackner
Thanks I’m pretty excited about them.
They’re re from ARP sport (Laile) ordered via Nengun (they actually added to their catalog for me). Had to be custom made so took a month and a half or so to get. Also due to size, shipping was as much as the panels :S but everything arrived in great shape and looks quality!
Seeing the hard line guard it would not be hard to make one yourself if you have some fabrication skill and took your time. Could probation do some thing similar for tank and front panel but they are a little more complex.
Re: Dumb, Stubborn, and bound to end up penniless…….
Posted: Sun Sep 15, 2019 6:19 pm
by Stin1
ZzzzzzzzzzzZz
Dumb, Stubborn, and bound to end up penniless…….
Posted: Sun Sep 15, 2019 7:09 pm
by aklackner
Dumb, Stubborn, and bound to end up penniless…….
Posted: Tue Sep 17, 2019 9:11 pm
by aklackner
Ok, few updates:
New rear ABS sensors went in.
Last bolts for the parking brake cables went in.
Gas tank installed (hopefully for good)
A couple heatshields in place.
And staged the tank shield so I can get it mounted up.
Re: Dumb, Stubborn, and bound to end up penniless…….
Posted: Wed Sep 18, 2019 7:36 pm
by aklackner
More progress today:
Rr. captive (toe/torque compensator) nut transferred
Rr. trailing + toe + upper control arms transferred
Rr. coilover installed
Rr. Lower control arm installed
Rr. caliper transferred
Rr. (J’s racing braided) brake line installed
Rr. hand brake cable installed
Rr. Abs sensor installed (partial -need a few more bolts)
Rr. Suspension/brake installed
Rr. Wheel staged
Re: Dumb, Stubborn, and bound to end up penniless…….
Posted: Thu Sep 19, 2019 8:52 pm
by aklackner
Left side today
Re: Dumb, Stubborn, and bound to end up penniless…….
Posted: Thu Sep 19, 2019 10:08 pm
by Stin1
That's got to feel rewarding. Looks great.
Dumb, Stubborn, and bound to end up penniless…….
Posted: Thu Sep 19, 2019 10:28 pm
by aklackner
Thanks, Better than it going up it’s going up pretty smoothly so far. At least as far as there’s little in the way left to find as surprises and all the rust has been dealt with so not busting bolts etc. Very cathartic.
Plan is next to swing into AC lines and start working toward getting the front subframe in.
Dumb, Stubborn, and bound to end up penniless…….
Posted: Fri Sep 20, 2019 8:01 pm
by aklackner
The latest:
Subframe (with new rigid collar set)
Steering Rack
UCAs (w/ Ingalls camber/caster kit)
LCAs
98+ JDM ARB
Knuckles
