Page 10 of 29

Re: VSM ITR build 01-0388

Posted: Sat Dec 14, 2019 11:49 pm
by aklackner
Out of curiosity where did you find an oem tank I couldn’t find the oem 00-01 anywhere

Re: VSM ITR build 01-0388

Posted: Sun Dec 15, 2019 3:36 pm
by coolhandluke
PeteTheCarFreak wrote: Mon Dec 09, 2019 5:22 pm ...Can't wait to see it at Type-R Expo if you bring it!!
I agree. :beer:

Insidiouseg6 wrote: Sat Dec 14, 2019 10:15 pm Exactly! Thanks bud. Went mountain biking near Laguna seca today and saw a few cars doing some laps and it made me wanna be out there!

Got a little work done today....
New OEM tank and hardware to replace the originals....
Image
You chose wisely on replacing the tank straps. That is a common item many overlook in maintenance. One breaks, none the wiser, until the second one breaks...then one has to replace their gas tank. :thumbup:

Re: VSM ITR build 01-0388

Posted: Mon Dec 16, 2019 11:30 am
by Insidiouseg6
aklackner wrote: Sat Dec 14, 2019 11:49 pm Out of curiosity where did you find an oem tank I couldn’t find the oem 00-01 anywhere
The Facebook pages. Got it off a fellow ITR owner who no longer needed it. This was about 2 year ago or so.

Re: VSM ITR build 01-0388

Posted: Mon Dec 16, 2019 11:32 am
by Insidiouseg6
coolhandluke wrote: Sun Dec 15, 2019 3:36 pm
PeteTheCarFreak wrote: Mon Dec 09, 2019 5:22 pm ...Can't wait to see it at Type-R Expo if you bring it!!
I agree. :beer:

Insidiouseg6 wrote: Sat Dec 14, 2019 10:15 pm Exactly! Thanks bud. Went mountain biking near Laguna seca today and saw a few cars doing some laps and it made me wanna be out there!

Got a little work done today....
New OEM tank and hardware to replace the originals....
Image
You chose wisely on replacing the tank straps. That is a common item many overlook in maintenance. One breaks, none the wiser, until the second one breaks...then one has to replace their gas tank. :thumbup:
Only made sense. New tank, all new hardware to match! I did break the over vent valve on the old tank and it looks to be discontinued so I will be on the hunt for one if anyone has a spare

Re: VSM ITR build 01-0388

Posted: Mon Dec 23, 2019 10:52 am
by Insidiouseg6
Retired the old interior wire loom for something more up to date.
Image
Image
Image
Image
Image
Image

Re: VSM ITR build 01-0388

Posted: Mon Dec 23, 2019 12:52 pm
by coolhandluke
Insidiouseg6 wrote: Mon Dec 16, 2019 11:32 am ...I did break the over vent valve on the old tank and it looks to be discontinued so I will be on the hunt for one if anyone has a spare
It's a shame Honda is discontinuing so many parts, especially when the economy has been strong 10yrs, enabling many to rebuild Acura/Honda's. I will ask a few sources to see if they have this piece. :thumbup:

The red isn't my style but I like the look of the wiring for a more track/race oriented car. :beer:

Re: VSM ITR build 01-0388

Posted: Thu Dec 26, 2019 10:04 pm
by Insidiouseg6
coolhandluke wrote: Mon Dec 23, 2019 12:52 pm
Insidiouseg6 wrote: Mon Dec 16, 2019 11:32 am ...I did break the over vent valve on the old tank and it looks to be discontinued so I will be on the hunt for one if anyone has a spare
It's a shame Honda is discontinuing so many parts, especially when the economy has been strong 10yrs, enabling many to rebuild Acura/Honda's. I will ask a few sources to see if they have this piece. :thumbup:

The red isn't my style but I like the look of the wiring for a more track/race oriented car. :beer:
Appreciate it! I actually found one after a couple of trips to the local pick-n-pull. I had tried a 99 Integra initially only to find out that it didn't have the over vent valve. Found a 00 Integra today and it had one in good shape! For reference In case anyone needs one, they are only on the 00-01 year Integras.

So with that said, I Installed the over vent valve and got the new tank and hardware on the car.
Image

Also picked up a new driver side cf faux vent as mine had one of the sliders broken
Image
Image

Replaced the rear license plate lights with a new set
Image

Re: VSM ITR build 01-0388

Posted: Fri Dec 27, 2019 12:20 am
by PeteTheCarFreak
Nice, I really enjoyed redoing my rear license plate lights on mine for some reason lol.

Re: VSM ITR build 01-0388

Posted: Sat Dec 28, 2019 9:51 am
by coolhandluke
Insidiouseg6 wrote: Thu Dec 26, 2019 10:04 pm ...I actually found one after a couple of trips to the local pick-n-pull. I had tried a 99 Integra initially only to find out that it didn't have the over vent valve. Found a 00 Integra today and it had one in good shape! For reference In case anyone needs one, they are only on the 00-01 year Integras.
Do you have pictures to help others identify the '00-01 over vent valve?

Excellent progress!

Re: VSM ITR build 01-0388

Posted: Sat Dec 28, 2019 12:01 pm
by g3teg97
Wire loom looks amazing. Excellent idea.