Reproduction Regamaster EVO center caps 114.3
Posted: Mon Mar 27, 2023 2:40 pm
THIS IS NOT A PRE-ORDER, I HAVE ALL PRODUCTION PCS. ON HAND
"SPUSA" Reproduction Regamaster EVO Center Caps
FITTING 4/5x114.3 Regamaster EVO
* Not my main purpose for being active, but if I'm going to do it, may as well do something w/ it. I wish to set aside 10% off final sales, which will go to the fine folks keeping this forum a float.
pictured will be the raw out of production image. Attached in a flickr album you will see final finish cap. First 10 sets sold will be at an unbelievable price (as they are unfinished). They are made in the USA, with materials purchased in the USA. They are aluminum and boast the same thickness of the OG Desmond caps. They are ready to be packed and shipped, going out as early as Friday Mar. 31st. 2023
- What's the difference finished and unfinished?
To keep the product as uniform as possible, Only 10, yes 10, introductory raw pcs will be sold. After that, QC takes priority and all future sale will be on "finished" center caps.
Flickr Album
Circa 2017 first run - my personal car
https://www.flickr.com/gp/jwebphotos/9B54nut626
Circa 2017 to current - sales/clients cars (this will be updated)
https://www.flickr.com/gp/jwebphotos/3A2eF88BNh
UN-Finished Cap price: too low to advertise DM or 909 728 5033
Finished Cap price: $200 + shipping (fees will be absorbed in the nature of business)
Batch 2023 (unfinished)
1. Todd G.
2. Kyle P.
3. Ervin S.
4. Mike I
5. Mike I
6. Dao
7. Kev NC
8. Jami P.
9. Mike T.
10.
"SPUSA" Reproduction Regamaster EVO Center Caps
FITTING 4/5x114.3 Regamaster EVO
* Not my main purpose for being active, but if I'm going to do it, may as well do something w/ it. I wish to set aside 10% off final sales, which will go to the fine folks keeping this forum a float.
pictured will be the raw out of production image. Attached in a flickr album you will see final finish cap. First 10 sets sold will be at an unbelievable price (as they are unfinished). They are made in the USA, with materials purchased in the USA. They are aluminum and boast the same thickness of the OG Desmond caps. They are ready to be packed and shipped, going out as early as Friday Mar. 31st. 2023
- What's the difference finished and unfinished?
- The unfinished product comes out raw, as the day it was born, what you see is what you get.
- The finished product is smoothed slightly with a 3M pad, appears more dull in finish but catching to the eye as it bears an oem finesse - This is where labor and supplies increase the price point.
To keep the product as uniform as possible, Only 10, yes 10, introductory raw pcs will be sold. After that, QC takes priority and all future sale will be on "finished" center caps.
Flickr Album
Circa 2017 first run - my personal car
https://www.flickr.com/gp/jwebphotos/9B54nut626
Circa 2017 to current - sales/clients cars (this will be updated)
https://www.flickr.com/gp/jwebphotos/3A2eF88BNh
UN-Finished Cap price: too low to advertise DM or 909 728 5033
Finished Cap price: $200 + shipping (fees will be absorbed in the nature of business)
Batch 2023 (unfinished)
1. Todd G.
2. Kyle P.
3. Ervin S.
4. Mike I
5. Mike I
6. Dao
7. Kev NC
8. Jami P.
9. Mike T.
10.