SOLD - FS: #98-0408 CW TX
Posted: Wed Jun 19, 2019 8:49 pm
SOLD!
1998 Acura Integra Type-R #0408 (Confirmed by Jay, no arm oem badge, only blank)
162888miles on chassis
02 K20a2 110xxx miles
Salvage Title (theft recovery)
AC delete model
VIN: JH4DC2317WS002820
Title in hand
I've owned this car almost 2 years after buying it off a HT member, he's probably here as well. I have all the information the previous owner had about the car for more history on the car. (The ZIPFILE attached to the post) I bought as a project to restore but unfortunately I have to buy a daily (mine was just totalled) and don't really want to daily the ITR.
Anyway, I bought it and the motor developed motor issues (gsr swapped in at some point in its life)and I chose to have a k20a2 with a 6 speed swapped in.
The car is fair condition, some paint issues (discoloring) and chips from prior ownership. I don't drive it often but when I have it's been solid, have driven it on road trips (250 miles each way).
Things I would improve/issues
Redo the swap harness - the harness looks like its been used in another swap and some splices. A/C is being run via toggle switch
Radio/speakers have a static sounds after being on a rough road
Upgrade the radiator - oem ITR is works great. no temperature issues. I just don't like the way it looks in the car.
Windows rattle, needs to be greased?
Rekey the car to match all locks
I'd like to get $12,000 OBO for it. I'm open to reasonable offers.
PM or email at boostedtaco @ yahoo.com
Things i've done/paid a shop to do since i've owned the car.
K20a2 swap with 6 speed - no details on the clutch life/mileage
Innovative mounts
K tuned budget header
RBC intake manifold
Karcepts cut shifter
Honda Kpro - tuned by Kenny at Speedfactory (would recommend a retune for your climate) No numbers as of yet.
ep3 32mm axles
Hybrid Racing eg/dc2 jumper harness with some Rywire harness of sorts
Hybrid Racing Powersteering kit
Hybrid Racing AC kit
Generic Intake
OBX twin loop connected to a 3" exhaust
Yellr - speedo calibration unit
Trunk cover and dash cam
Tint
205/50/15 Federal 595rsr tires just above the wear bar
Hawk HPS pads
Car came with these mods
JDM Recaros
Circuit Hero Shift Extender
Momo Steering wheel/Oem leather wrapped wheel (from a GSR?)
Buddy Club N+ Coilovers
Buddy Club front upper control arms
Buddy Club Rear camber kit
ST sway bars
Oem CW wheels
1998 Acura Integra Type-R #0408 (Confirmed by Jay, no arm oem badge, only blank)
162888miles on chassis
02 K20a2 110xxx miles
Salvage Title (theft recovery)
AC delete model
VIN: JH4DC2317WS002820
Title in hand
I've owned this car almost 2 years after buying it off a HT member, he's probably here as well. I have all the information the previous owner had about the car for more history on the car. (The ZIPFILE attached to the post) I bought as a project to restore but unfortunately I have to buy a daily (mine was just totalled) and don't really want to daily the ITR.
Anyway, I bought it and the motor developed motor issues (gsr swapped in at some point in its life)and I chose to have a k20a2 with a 6 speed swapped in.
The car is fair condition, some paint issues (discoloring) and chips from prior ownership. I don't drive it often but when I have it's been solid, have driven it on road trips (250 miles each way).
Things I would improve/issues
Redo the swap harness - the harness looks like its been used in another swap and some splices. A/C is being run via toggle switch
Radio/speakers have a static sounds after being on a rough road
Upgrade the radiator - oem ITR is works great. no temperature issues. I just don't like the way it looks in the car.
Windows rattle, needs to be greased?
Rekey the car to match all locks
I'd like to get $12,000 OBO for it. I'm open to reasonable offers.
PM or email at boostedtaco @ yahoo.com
Things i've done/paid a shop to do since i've owned the car.
K20a2 swap with 6 speed - no details on the clutch life/mileage
Innovative mounts
K tuned budget header
RBC intake manifold
Karcepts cut shifter
Honda Kpro - tuned by Kenny at Speedfactory (would recommend a retune for your climate) No numbers as of yet.
ep3 32mm axles
Hybrid Racing eg/dc2 jumper harness with some Rywire harness of sorts
Hybrid Racing Powersteering kit
Hybrid Racing AC kit
Generic Intake
OBX twin loop connected to a 3" exhaust
Yellr - speedo calibration unit
Trunk cover and dash cam
Tint
205/50/15 Federal 595rsr tires just above the wear bar
Hawk HPS pads
Car came with these mods
JDM Recaros
Circuit Hero Shift Extender
Momo Steering wheel/Oem leather wrapped wheel (from a GSR?)
Buddy Club N+ Coilovers
Buddy Club front upper control arms
Buddy Club Rear camber kit
ST sway bars
Oem CW wheels