The Replacement Parts Thread

[coolhandluke]

Adler is oem supplier for the clutch master and slave cylinders. They are identical in every detail and made in Japan. The master cylinder even has the nissin logo. Save your self some bucks vs. the dealer...

Do you have the Adler PN handy for the CMC, slave, or BMC? I've been searching this weekend to help another community member, jdmspoonitr, but running short.

This is the only Adler unit I've found but the model isn't listed:
https://shop.advanceautoparts.com/p/adl ... 10768506-P
PN: N3000180951ADL

BMC options for the OE Nissin unit:
* JHP & Ballade have the same unit @ ~$158, ref: https://balladesports.com/products/niss ... r-cylinder
* Rock Auto has options: https://www.rockauto.com/en/catalog/acu ... inder,1836 $50-$100


More:
* Autozone units do not include the reservoir
* Oreilly's doesn't list the BMC on their site
* Napa Auto Parts do not include the reservoir

[oddomatik]

Adler is oem supplier for the clutch master and slave cylinders. They are identical in every detail and made in Japan. The master cylinder even has the nissin logo. Save your self some bucks vs. the dealer...

Do you have the Adler PN handy for the CMC, slave, or BMC? I've been searching this weekend to help another community member, jdmspoonitr, but running short.

Not sure about adler PN and maybe you've seen this... Most seem to list - and are searchable on eBay by -"* master cylinder" + adler (or nissin)

BMC:
46100ST7L52
https://www.ebay.com/itm/203946595625

CMC:
46920-SR3-A01
https://www.ebay.com/itm/400337151143

Set w/ Slave (46930-SR3-013):
https://www.ebay.com/itm/401072758579

[Klasse]

^ That is great info.

Has anyone noticed parts being discontinued but then weirdly available again a while later? Perhaps I'm losing my mind but I'm sure ignitors did that.

Also Amayama is showing 23623-P21-315 syncro for 3-4 as out of production. Synchrotech seems to be the go to?

[Stin1]

Adler is oem supplier for the clutch master and slave cylinders. They are identical in every detail and made in Japan. The master cylinder even has the nissin logo. Save your self some bucks vs. the dealer...

Do you have the Adler PN handy for the CMC, slave, or BMC? I've been searching this weekend to help another community member, jdmspoonitr, but running short.

This is the only Adler unit I've found but the model isn't listed:
https://shop.advanceautoparts.com/p/adl ... 10768506-P
PN: N3000180951ADL

BMC options for the OE Nissin unit:
* JHP & Ballade have the same unit @ ~$158, ref: https://balladesports.com/products/niss ... r-cylinder
* Rock Auto has options: https://www.rockauto.com/en/catalog/acu ... inder,1836 $50-$100


More:
* Autozone units do not include the reservoir
* Oreilly's doesn't list the BMC on their site
* Napa Auto Parts do not include the reservoir

I don’t have the bmc. I have the cmc and master part # s.

0816840F-971B-47CD-AF53-C833543751F3.jpeg (3.19 MiB) Viewed 6353 times

9C941DA8-423C-48A3-AB10-69D7FC3268C1.jpeg (3.02 MiB) Viewed 6353 times

[Jdmspoonitr]

Thanks for the help ya’ll!!

Anyone know what the deal is with this part?

https://www.autohausaz.com/pn/46100ST7L51

Says it is the Nissin part. Ideally I buy the same part that came from Honda, but really just want a quality part that will last through the track abuse.

[coolhandluke]

Thanks for the help ya’ll!!

Anyone know what the deal is with this part?

https://www.autohausaz.com/pn/46100ST7L51

Says it is the Nissin part. Ideally I buy the same part that came from Honda, but really just want a quality part that will last through the track abuse.

The above does not match in PN recommended above:
46100-ST7-L52

Reference:

Not sure about adler PN and maybe you've seen this... Most seem to list - and are searchable on eBay by -"* master cylinder" + adler (or nissin)

BMC:
46100ST7L52
https://www.ebay.com/itm/203946595625

CMC:
46920-SR3-A01
https://www.ebay.com/itm/400337151143

Set w/ Slave (46930-SR3-013):
https://www.ebay.com/itm/401072758579

[Jdmspoonitr]

Just ordered the part from ballade sports

The rubber donut thing is still available from honda


46185-S04-J01

[Jdmspoonitr]

So BMC arrived from Ballade.

Interesting results.

-NTP box
-Adler sticker and part number on the part bag
-Nissin stamped unit

Sort of unclear whether this is a refurb or what. Came with a blue cap and will probably use the oem grey cap.

[Klasse]

So if I was to buy bearings for a B18CR which will need a rebuild maybe years from now, which colours am I most likely to need? I know this is kinda stupid as the engine is not open, but I am probably ok with buying 2 or 3 sets of the most common colour before everything is discontinued.

Thanks for help

[coolhandluke]

That is a good but I fear it is a difficult question. My (limited) understanding is each should be measured, the measurements leading to a color, to match with the bearing. This is why I've long preferred OEM bearings over one-size fits all bearings from third-party offerings.