OEM shift boot (black) 2001 CDM

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
DC231
Posts: 479
Joined: Wed Aug 23, 2017 7:30 pm

Re: OEM shift boot (black) 2001 CDM

Post by DC231 » Tue Feb 27, 2018 12:45 pm

the part number tour posted is standard in all other models besides the R

touringteg
Posts: 346
Joined: Thu Aug 17, 2017 11:34 pm

Re: OEM shift boot (black) 2001 CDM

Post by touringteg » Tue Feb 27, 2018 12:48 pm

That's confusing lol

So the SR3 part # works on other Integras and EG Civics but it is missing the chrome ring?

My parts guy said the 2001 CDM shift boot is discontinued in Canada so that is a shame.

From what I gather all 97 - 01 ITR shift boots for CDM / USDM are NLA?

Ugh. I thought the MKIV Supra was bad for discontinued parts but ITR is going down the same path.
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM

User avatar
boostjunkie33
Posts: 94
Joined: Mon Aug 14, 2017 10:35 am
Location: 6ix

Re: OEM shift boot (black) 2001 CDM

Post by boostjunkie33 » Tue Feb 27, 2018 1:00 pm

touringteg wrote: Tue Feb 27, 2018 12:48 pm That's confusing lol

So the SR3 part # works on other Integras and EG Civics but it is missing the chrome ring?

My parts guy said the 2001 CDM shift boot is discontinued in Canada so that is a shame.

From what I gather all 97 - 01 ITR shift boots for CDM / USDM are NLA?

Ugh. I thought the MKIV Supra was bad for discontinued parts but ITR is going down the same path.
CDM yes, 00-01 US used the SR3 if I'm correct. I forget sometimes these cars are 20 years old. At least they're hella more reliable than any of my old german iron.
DD-'23 S3
'93 Miata
'90 CRX SI
'01-1212

Stin1
Posts: 1672
Joined: Fri Nov 17, 2017 10:43 pm

Re: OEM shift boot (black) 2001 CDM

Post by Stin1 » Tue Feb 27, 2018 1:43 pm

The 00-01 as well as the jdm have a regular black ring that is too small to clip on the shifter. The em1 boot has the right chrome ring but lacks the stitching.

Stin1
Posts: 1672
Joined: Fri Nov 17, 2017 10:43 pm

Re: OEM shift boot (black) 2001 CDM

Post by Stin1 » Tue Feb 27, 2018 1:57 pm

Some of you may have heard this . " its to big to fit" .
IMG_0673.JPG
IMG_0673.JPG (369.33 KiB) Viewed 1443 times

touringteg
Posts: 346
Joined: Thu Aug 17, 2017 11:34 pm

Re: OEM shift boot (black) 2001 CDM

Post by touringteg » Tue Feb 27, 2018 2:10 pm

^ Just to confirm JDM had red stich and CDM/USDM are all black?

Just double checked my 2001 CDM and it has the chrome ring. It is in good condition but the boot tents to pull down off the ring on side facing the rear of the car. I am always pulling it up but it doesn't stay put.
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM

User avatar
boostjunkie33
Posts: 94
Joined: Mon Aug 14, 2017 10:35 am
Location: 6ix

Re: OEM shift boot (black) 2001 CDM

Post by boostjunkie33 » Tue Feb 27, 2018 2:22 pm

That’s correct.
DD-'23 S3
'93 Miata
'90 CRX SI
'01-1212

DC231
Posts: 479
Joined: Wed Aug 23, 2017 7:30 pm

Re: OEM shift boot (black) 2001 CDM

Post by DC231 » Tue Feb 27, 2018 2:23 pm

the boot for 00-01 model usdm type R is available still. but as stin pointed out the 97-98 shift knob will not fit into the 00-01 shift boot

Stin1
Posts: 1672
Joined: Fri Nov 17, 2017 10:43 pm

Re: OEM shift boot (black) 2001 CDM

Post by Stin1 » Tue Feb 27, 2018 3:05 pm

IMG_1948.JPG
IMG_1948.JPG (334.16 KiB) Viewed 1436 times
this guy did something. I think if I could switch the ring to the jdm boot it would also be to short and tug off in fifth. Not sure what he has spotted it at ifo two years ago.

touringteg
Posts: 346
Joined: Thu Aug 17, 2017 11:34 pm

Re: OEM shift boot (black) 2001 CDM

Post by touringteg » Tue Feb 27, 2018 4:21 pm

Dc231 if 00 to 01 is available with the chrome ring do you know the part #?
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 0 guests