Adhesive for rear hatch molding to glass

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Post Reply
User avatar
GeHonda
Posts: 31
Joined: Thu Oct 10, 2019 12:12 am
Location: Southern Utah

Adhesive for rear hatch molding to glass

Post by GeHonda » Mon Oct 14, 2024 4:57 pm

Gents,

Looking at the FSM, page 20-66, describes the process of installing an adhesive into the groove of the rear window molding prior to installing it, then you install it onto the glass, wipe it down, let it cure, and then later install the glass onto the chassis.

The FSM does not specify what kind of adhesive. Does anyone know what is appropriate for the molding to the glass? Should it just be the same window adhesive for the glass to the chassis?

Thanks in advance!
Attachments
rear_glass_adhesive.png
rear_glass_adhesive.png (529.96 KiB) Viewed 105 times
1998 DC2 GSR, ITR clone project
1990 CRX Si
Previous owner of 98-0046, 98-0408

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest