oil pan baffle necessary at expo?

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Post Reply
97cwr
Posts: 14
Joined: Sat Dec 09, 2017 10:31 am

oil pan baffle necessary at expo?

Post by 97cwr » Mon May 21, 2018 11:42 am

I picked up an oil pan baffle and I'm not sure if I can get it installed before the expo. I was just wondering is it a must to have? how many don't run one? I'm in the amateur grouping, running a stockish integra type r with re71 r tires and koni/gc suspension. I've done a couple track days with just the stock oil pan, but just wondering if this track and my setup will require one?

Lturner
Posts: 333
Joined: Sun Aug 13, 2017 11:57 am
Location: BFE

Re: oil pan baffle necessary at expo?

Post by Lturner » Mon May 21, 2018 12:38 pm

I would recommend one. But most of us have tracked a lot without one. I don’t have one on the rhd. I just keep the oil topped off.
01-0629 PY I think?
00-1587 from the motherland CW
17-01699 RR

User avatar
jayhaire
Site Admin
Posts: 712
Joined: Mon Aug 07, 2017 10:24 pm
Location: Chicago
Badge Number: 97 #00151
Contact:

Re: oil pan baffle necessary at expo?

Post by jayhaire » Mon May 21, 2018 1:12 pm

It's nice to have, but you can get by without one if:

- keep oil level up (watch this before each session)
- not running R-comps

That was our general rule ~15 years ago. Novice group is slow enough to keep the lateral Gs down also.
:hammer:

hootrscootr
Posts: 228
Joined: Mon Aug 14, 2017 9:10 am
Location: goose creek south carolina

Re: oil pan baffle necessary at expo?

Post by hootrscootr » Mon May 21, 2018 1:28 pm

I've never run 1 and never had a problem at VIR or Road America but like the others said, watch the oil level and run the good stuff.
00-1175

User avatar
RTW DC2R
Posts: 566
Joined: Sun Aug 13, 2017 6:21 pm
Location: Dirty Jersey

Re: oil pan baffle necessary at expo?

Post by RTW DC2R » Mon May 21, 2018 2:27 pm

Youll be fine just check your oil after each session. Ive done a lot of tracking and have only lost VTEC once through a corner. It was at VIR at Expo 16 through Hog Pen but that corner has high compression grip and lateral G's. My oil was very low too :hammer:

Dominion doesnt have any high grip corners like Hog Pen so I think anyone will be fine there with a stock pan and sufficient oil level.
98-0034 (sold)
00-XXXX (sold)

practice chaos to develop control.

97cwr
Posts: 14
Joined: Sat Dec 09, 2017 10:31 am

Re: oil pan baffle necessary at expo?

Post by 97cwr » Mon May 21, 2018 6:41 pm

thank you guys. i'll do without it for the expo.

Chase_acura
Posts: 107
Joined: Mon Aug 14, 2017 1:51 pm

Re: oil pan baffle necessary at expo?

Post by Chase_acura » Tue May 22, 2018 8:06 pm

install at track? lol 8-)

97cwr
Posts: 14
Joined: Sat Dec 09, 2017 10:31 am

Re: oil pan baffle necessary at expo?

Post by 97cwr » Tue May 22, 2018 10:10 pm

a few extra hands and a welder??? Lol. actually, you made me think about something. what's the craziest repair/mod done at an expo? This is my first so, maybe a vet can chime in...

Lturner
Posts: 333
Joined: Sun Aug 13, 2017 11:57 am
Location: BFE

Re: oil pan baffle necessary at expo?

Post by Lturner » Tue May 22, 2018 11:04 pm

Head swap expo 9? Or Craig replacing valves expo 14?
01-0629 PY I think?
00-1587 from the motherland CW
17-01699 RR

User avatar
jayhaire
Site Admin
Posts: 712
Joined: Mon Aug 07, 2017 10:24 pm
Location: Chicago
Badge Number: 97 #00151
Contact:

Re: oil pan baffle necessary at expo?

Post by jayhaire » Fri May 25, 2018 9:37 pm

Willard doing a final drive install at Expo 3? :o

I think we've had just about everything done at Expo over the years. 18 years...the event is legally an adult now.
:hammer:

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests